IPVanish TAP Device Not Installed 2023

Click the arrowhead to the left of Network Adapters to expand the tree, and look down the list of adapters. If you see ‘TAP-Windows Adapter V9’ then you have the generic TAP adapter installed.

Ipvanish tap device won’t install

Об этой странице

Мы зарегистрировали подозрительный трафик, исходящий из вашей сети. С помощью этой страницы мы сможем определить, что запросы отправляете именно вы, а не робот. Почему это могло произойти?

Эта страница отображается в тех случаях, когда автоматическими системами Google регистрируются исходящие из вашей сети запросы, которые нарушают Условия использования. Страница перестанет отображаться после того, как эти запросы прекратятся. До этого момента для использования служб Google необходимо проходить проверку по слову.

Источником запросов может служить вредоносное ПО, подключаемые модули браузера или скрипт, настроенный на автоматических рассылку запросов. Если вы используете общий доступ в Интернет, проблема может быть с компьютером с таким же IP-адресом, как у вас. Обратитесь к своему системному администратору. Подробнее.

Проверка по слову может также появляться, если вы вводите сложные запросы, обычно распространяемые автоматизированными системами, или же вводите запросы очень часто.

IPVanish TAP Device Not Installed 2023

IPVanish TAP Device Not Installed

Is your IPVanish TAP device not installed in 2023? Don’t worry, In this article, we’ll go over how to successfully install TAP device for IPVanish.

It’s not uncommon for VPN users to experience the “IPVanish TAP device won’t install” issue. If you are facing the same issue, don’t sweat it, we’ve got your back. We will go over all the information in regard to why and how to install the TAP device for IPVanish.

Table of Contents

What Is IPVanish Tap Device?

IPVanish TAP Device is essentially a driver that is installed alongside IPVanish. A TAP device is displayed in your Control Panel > Network and Internet > Network Connections once it has been installed. It enables Windows to build an encrypted tunnel between your computer and the VPN server.

In normal cases IPVanish TAP device is automatically installed along with VPN. But there are some rare situations when users face IPVanish TAP device not installed issue. you can face this issue while using IPVanish multiple devices.

How To Install TAP Device For IPVanish In 2023?

How To Install TAP Device For IPVanish

If you’re facing the “IPVanish TAP device not installed” issue, don’t worry; we are here to help. Simply follow the steps outlined to begin using the IPVanish TAP device to safely access the internet.

  • Exit IPVanish application
  • Download the TAP drivers from OpenVPN website
  • Once the IPVanish TAP device download is completed
  • Install the TAP drivers using default setting

Now you should be able to use IPVanish TAP devices easily. If, despite following these steps, the IPVanish TAP device won’t install, then please contact IPVanish customer service. We also have solution for IPVanish not connecting on Firestick in case you are facing this issue.

No.1 Choice NordVPN

Buy IPVanish Upgraded Plan
Purchase IPVanish upgraded plan to get an automatically installed IPVanish TAP device.
Purchase IPVanish upgraded plan to get an automatically installed IPVanish TAP device. Show Less

IPVanish Won’t Connect After Installing TAP Device

If IPVanish is not working after installing TAP devices, then there is a chance that the issue is caused by the following reasons:

IPVanish Server Is Not Responding

If IPVanish isn’t working properly, it doesn’t always mean that there is a problem with your device or application. There are chances that the server you are trying to connect to has issues.

To check if that’s the case or not, try connecting to other servers. If you are still facing these issues then make sure to check company’s official accounts to see if there have been any announcements about server problems.

IPVanish Connection is blocked by User Account Control

This is rare, but there are times when user account control (UAC) is switched on and doesn’t allow OpenVPN or PPTP protocol connection.

To turn off user account control, follow the steps mentioned below:-

  • Go to start, type Control panel and open the panel
  • Navigate to Control Panel’s search box on the top right and type UAC. (you can also do this by going to control panal> system and security> security and maintenance)
  • If you used the search box, click the “Change user account control settings” button. If you used the navigation method, then select Change setting from the security drop-down menu.
  • You will see a popup window, slide the slider all the way to the bottom and click ok. Enter the administrator password if asked.
  • Now just restart the computer and try connecting IPVanish again.

The Message “Authentication Failed” Appears.

If you are receiving an “authentication failed” message there are chances your user id or password is rejected. There are three major reasons behind this popup.

  • Your account has expired:- There are chances that you may have forgotten to renew your IPVanish plan. If this is the case then renew your account by logging in on the IPVanish site on your browser. You can also use the IPVanish renewal discount.
  • Incorrect username or password:- There are times when you think you are putting the correct id and password but instead you’re putting the wrong password. So insert the password carefully. If you don’t remember then change your IPVanish password and try again.
  • Problem with the servers:- If the problem is with the server then there is nothing you can do just wait for the servers to get online again or contact customer support.

How to fix Windows TAP adapter errors

The OpenVPN installer attempts to install a TAP adapter as well as its own code

If you’ve ever used a VPN service on desktop then you’ve probably come across the term TAP Adapter. Unfortunately, you’re most likely to have seen it in some unhelpful error message.

Whether it’s ‘All Windows TAP adapters in use’, ‘No TAP adapter available’, or ‘An error occurred installing the TAP device driver’, there’s often a TAP problem somewhere with your name on it!

And the messages usually give you little or no advice on how to figure out the problem, either, so the best you can do is pop them into a search engine and see what comes up.

But this isn’t quite as bad as it seems. In this article, we’ll explain what TAP adapters are, what they’re for and why they matter when you’re running a Windows 10 VPN on PC. And once you understand just some of the background, you’ll find you can fix most TAP issues very quickly.

Do I have a TAP adapter?

A TAP adapter is a software-based network device which allows a VPN to securely communicate with its servers. It’s such a fundamental component that if the TAP adapter isn’t installed or working then some VPNs won’t work at all, resulting in all those pesky error messages you know so well.

TAP adapters come in many different flavors, which can make life confusing. Some VPNs install a plain, ordinary, generic TAP adapter, but others have specially patched ones which only work with their own service. You might even have two or more versions installed at the same time.

To check your setup, click start, type DEVMGMT.MSC and press Enter to launch Device Manager.

Click the arrowhead to the left of Network Adapters to expand the tree, and look down the list of adapters. If you see ‘TAP-Windows Adapter V9’ then you have the generic TAP adapter installed.

But custom versions often have the VPN name included, too, like ‘TAP-NordVPN Windows Adapter V9.’ if you’re a NordVPN user. If you’re unsure, double-click a driver, click the Driver tab, then Driver Details: if the Provider or Copyright mentions OpenVPN then it’s probably a TAP adapter.

Multiple TAP adapters

Having two or more TAP adapters installed can sometimes cause problems, especially if you’ve also installed more than one VPN. One VPN app might try to use an adapter belonging to another VPN, for instance, leaving the second app to complain that there are no adapters available.

VPN providers recognize that this is a problem, and some apps include an option to ‘repair’ the TAP adapter, restoring its regular settings to help the app find it again. In the IPVanish Windows app, for instance, click Settings, Connection, and you’ll find an Install/ Repair OpenVPN Driver option which could solve the problem.

You can also try resetting a TAP adapter by disabling and enabling it, the software equivalent of turning it off and on again. Right-click your VPN’s TAP adapter in Device Manager that you found earlier, choose Disable Device, and click Yes when you’re asked to confirm that. Wait a few seconds, right-click Enable Device, reboot your PC and try connecting to the VPN again.

Uninstall and reinstall a TAP adapter

Most VPN apps automatically install a TAP adapter with their own files, so reinstalling the app often fixes any TAP issues.

Click Start, type and launch Control Panel, then click Programs, Uninstall a Program. Find the entry for your Windows VPN app, click it and select Uninstall.

Sometimes there’s a second item representing the TAP adapter, something like ‘MyVPNName network TAP’. If it’s still there, uninstall that, too.

Reboot, then download and install the latest app. Reboot again, launch the app, and see if you have any more connection success.

If you have two or more VPNs installed, we’d recommend uninstalling any that you don’t really need, to reduce the chance of conflicts. Even if you absolutely must run a couple of VPNs side-by-side, for some reason, uninstall one of them temporarily to see if that fixes the problem.

More TAP tricks

Stubborn TAP adapter problems can be due to leftovers from a previous installation. We’ve previously been unable to install a new TAP adapter because it was blocked by a previous, damaged version, for instance.

If you really know what you’re doing, follow our guide on how to completely uninstall a VPN (particularly the Network Adaptors and System Drivers sections) to clean up any old VPN files and settings. But be careful: messing up here can damage your PC, so don’t even think of it unless you’re confident in your disaster recovery abilities.

If you still can’t solve your problem, it’s possible you can bypass it. Disable the NordVPN TAP adapter, for instance, and its app can’t connect via OpenVPN. But switch to the NordLynx protocol (click Settings, Auto-connect, choose NordLynx from the VPN Protocol list) and it should work again.

That kind of quick fix isn’t a great choice, because if a VPN app is displaying errors and you don’t know exactly why, then it may be reliably protecting you any more (there might also be encryption issues, say.) But it should keep you running for a while, if that’s the priority.

After all your hard troubleshooting work, though, the best idea is to contact your VPN support team and ask for help. Tell them everything you’ve tried so far, and they should be able to point you in the right direction.

Read more:

  • Get protected online for less with a great cheap VPN.
  • . and with market-leading antivirus software
  • Stop logging of your PC activities with our Windows 10 privacy guide